Yr1030 Lithium Battery Internal Resistance Test Instrument 0-45V Nickel Nickle Hydride Button Battery Tester Combination 1

（This product has passed the calibrationbefore leaving the factory, so it doesNOTneed toRESET/ZEROor calibrate again）

PRODUCT FEATURES

Self- assured after-sales technical support. True 4-wire AC sine measurement, to effectively avoid the impact of test lines and contact resistance. Two functions interface, the original battery sorting function. Built-in battery, Andrews mobile phone charger to charge, low power consumption + a variety of power-saving options. Test range up to 200 ohms with a minimum resolution of 0.01 milliohms and less than 5 milliohms. Press HOLD to enable the ZR function to measure internal resistance as low as 0.30--0.50 milliohms.

Hand-built, demanding on the appearance of careful shot.2017 battery internal resistancetester. True four-wire 1Khz AC sinusoidal battery resistance meter 0.000010 --- 200 range.Measurable lead-acid, lithium-ion, lithium polymer, lithium iron phosphate, alkaline, drybatteries, nickel metal hydride, nickel cadmium, button batteries. Use the ZR function tomeasure internal resistance up to 5 milli-ohms. Due to the batch of problems may result ina slight difference between the physical and the picture

Note: please leave your email for electronicManual. Read the instructions before use and instrument back note. It is strictly forbidden toinput AC signal and above 45V DC voltage.

Instrument built-in battery, pay attention to the selected courier and shipping can betransported, otherwise the mainland outside the region without the default battery.

Another other types of measuring instruments have been introduced, please pay attention.OUR will be committed to the advanced concept of starting, to create a local excellent instrument manufacturers and work. And then hard to adhere to the original design.The machine is not equipped with a charger, charging can be charged with Android mobile phone charger ~

Purchase guidance:

Test line length is 0.5 meters

Combination 1: host + probe test line (suitable for measuring various types of batteries, goodversatility. Twisted-pair leads to improve immunity)

Combination 2: host + Kelvin folder (for measuring leads, tabs and other ears. Conductor easytwisted pair, the accuracy is better)

Combination 3: Host +18650 test stand (for cylindrical batteries such as 18650. Suitable forsingle-handed operation, convenient and efficient, with the sorting function suitable forincoming testing)

Combination 4: Host +18650 test frame + Kelvin folder + probe test line (for measuring moretypes of batteries, corresponding to a variety of circumstances)

Combination 5: host + probe test line + Kelvin folder

Combination 6: Host +18650 test stand + probe test line

Combination 7: Host +18650 test stand + Kelvin folder

Main parameter:

Internal resistance measurement:

Precision format: + ([]+[minimum effective digit percentage accuracy])

Minimum range resolution accuracy

20mQ 0.01mQ 0.7%+ 7(when ZR function is enabled)

200m0 0.1m0 0.5%+5

20 1mQ 0.5%+5

200 10mQ 0.5%+5

2000 0.10 0.6%+5

In the gear 5%-95% range, within this range (less than 5% gear range, or greater than 95%gear range range), the error may be greater than the accuracy mentioned above.

Voltage measurement:

2V 0.001V 0.8%+5

20V 0.01V 0.8%+5

28V 0.1V 0.8%+5

Features:

1. Voltage resistance with the screen at the same time measurement, measurement quickly and steadily.

The minimum resolution of up to 0.01 milliohms, easy to test large capacity, high discharge rate low resistance battery. Range can be 200 ohms, can be measured button batteries, 9V laminated battery and other low-capacity small current high internal resistance battery.

2. Voltage, internal resistance function, respectively, with manual automatic range function.Automatic range switch stable and fast, the measurement shows 4 times per second update,the basic can be locked in about 1S time range stable display. HOLD function to help you lock the display, more convenient reading.

3. Using dot matrix LCD screen.

Size font combination, which clearly shows the measurement results, but also display richcontent. Chinese menu is rich in settings.

4.2 kinds of display mode.

Normal mode with the screen display resistance and voltage, sorting mode shows the internal resistance voltage and the level of battery classification and counting.

5. Has a three-level battery rating detection.

By setting the voltage resistance rating, the battery can be grouped.

6. Built-in lithium polymer rechargeable battery.

And more reserved for a standby power interface, can expand the larger capacity.

7. Built-in charge management circuit.

And can be set to 200mA and 400mA two charging current.

8. Energy saving function.

Can be set 5 - 60min shutdown delay. No operation and input, the ultra-delayed automaticshutdown. Can be set to 5-30min delay into low power mode.