Raspberry Pi 4 Model B Dual Fans Cnc Aluminum Alloy Case Metal 4 Color Armor Shell With Heat Sinks For Raspberry Pi 4B/3B+/3B

Pros'n'Cons :: + its actually a good heatsink.. (well, i personally like copper plate ones more .. those are kind of ultimate choice with external fan ofc) + its beautiful + it has holes for ribbons - well, seriously, it wants at least 8 dielectric washers.. why not - only 3 chips are covered :: cpu and memory are ok .. but third one got only part of it covered .. (yes there are more expensive solutions I know) <- still its ok at loads

Excellent box, not very pondered bolts in the kit, but it's just the hands of curves, knocked down the thread, pulled out the pliers. Do not twist tight and everything will be fine. Pleased that for coolers 8 bolts, which can be used to mount the case, easily replaced the broken and left fans on 4 bolts.

Works well. Keeps Pi4 nice and cool and is pretty quiet especially if I put the pi on a piece of polystyrene! Unfortunately 4 of the 6 bolts provided to attach the base to the top were too short to work - but luckily 2 were enough to secure the unit. The screws for the fans were fine.

Took for Raspberry Pi 4 on Manjaro GNOME. Parameters of overclock CPU = 2000, GPU = 700, did not drive further. In a 15 minute stress test with 100% CPU load heated to 77 degrees, in normal mode 50-60

All parts of the case are made qualitatively of cast aluminum, it's going to be normal, it came to my Rasberry 3 without problems. Fans work quietly. When working, the body is slightly warm.

Excellent quality and well packed. At the speed of Pi4 2000MHz when operating the Sega Saturn emulator, the temperature is 52-55 degrees, no longer rises. Thank you seller. Recommend.

It matches the description, it's good quality. Snack well, the Raspberry does not go above 55 degrees (Celsius). The only thing the fans bring little, but they're not needed either.

Approached perfectly! Thermal pads though "3 M", but not quite tight, time will show. The temperature fell already by 10 degrees, the coolers almost do not make noise. Recommend!!!

Beautiful body. Cooling is good, it's a pity that the terminal is double or then would connect to 3V that would not have fans so much burst. And so everything is super!

I used to have the red official box and it was always in 60 °. Switching to this box with fans does not exceed 40 °. Better than expected.

nice! fans makes no noise (im not even sire if they do something). Anyways after a 15 cpu stress test max temp was 53c so its very nice.

All as it was written about the product, the case is good, under the Raspberry Pi 3B + came perfectly, the coolers are quite quiet

Good body, quiet coolers. On the holes all clearly, in the complete set were bolts and thermal pads. With its task copes well

Stable temperature without the case was 54 Celsius. Stable temperature with the case and the fans switched on is 36 Celsius.

It is functional, does what is meant to do. Comes with thermal pads for the PI, screwas are also included.

Good quality product but I have not tested it in RPi DIY projects; very fast shipping to Israel

Product as described. Good quality for the price. I recommend this seller and its products.

Good product. This and https://a.Adafar.com/_vV6obe are my favorite raspberry pi cases.

Fast delivery in RND, well packed. Recommend. The temperature fell by 10 degrees

Not a bad case, Malinka holds about 45 degrees in home assistant

Fits perfectly. Works Very well, keeps cool. No noise from fans

For such a price is just a chic thing, fans, though, noisy.

It improves some degrees the temperature. I recommend it!

Delivered to Samara in 11 days. Fans blow inside.

Everything is fine and delivery and goods

Quickly came without being taxed.

Perfect for Rpi4 with Kodi

Top case too