• R&Amp;D Tc100 Coating Thickness 0.1Micron/0-1300 Car Paint Film Thickness Tester Measuring Fe/Nfe Russian Manual Paint Tool


    USD $52.50VAT Included50% OFFFree Shipping
    Just for Dropshipping and Wholesale



    How to pay?
    • Ships in 24 hours via Fast Shipping.
    • Estimated Delivery 5 to 9 Business Days.
    Customer Reviews
    *Note: Some reviews have been processed by Google Translate!
    W***x Verified Buyer

    Good thickness gauge. Relatively precisely works by iron. Breaks the putty to 1900 Micron. There were some difficulties with calibration on aluminum-on the plate originally showed 40 microns and when calibrated changed to 50. He was able to fix it with an iron-20 micron was shown on it and calibrated at 0. After that, he continued the calibration of regular plates. There were problems with IML delivery-they misread the address (the seller indicated it correctly) and the parcel rolled several times at the opposite end of the Moscow region.

    5
    W***t Verified Buyer

    The seller quickly sent the goods. He himself wrote the cost of 10s, although I forgot to ask it, well done :) the goods came to Minsk for 3 weeks, was tracked all the way. In the kit case, 2 plates (iron and aluminum) + calibration plastic plates, there is an understandable instruction for Russian. It is powered by a "crown" battery, bought separately. Worst poor calibrated, shows with an accuracy of 0,1...15 units, for finding putty is quite suitable. Defines iron and aluminum. Looks quality. I recommend both the goods and the seller.

    5
    A***o Verified Buyer

    I bought a thickness gauge to measure the thickness of plastic bags. With this task, he does not do very well. The testimony floats +/- 5 microns, which for my task is critical. For example: I measure the package with a thickness of 80 microns, and the device shows any values from 75 microns to 85 microns. On the iron (Fe) calibrated well, and on the aluminum (NF) in zero never dropped. And 50/100/250/500/1000 calibrated, but it is zero on aluminum is not put.

    5
    K***e Verified Buyer

    Everything came in less than a week. The device works, shows less precisely. For its purpose, just super. I did not try how much battery is enough in the frost, but in a warm room 2 days of constant work on the battery did not affect in any way. The only thing, the size is slightly too big, it's uncomfortable to carry in your pocket.

    5
    Y***y Verified Buyer

    Excellent goods, came relatively quickly. Everything came unharmed, in the package there is everything as in the description. Calibration performed as written in the instruction, everything works properly. I checked on the car, everything shows. To the seller Thank you very much!

    5
    E***c Verified Buyer

    Very satisfied with the purchase, the packing is simply chic, even the cheholchik is, everything is attached, the delivery is fast (for a week delivered, given the holidays) was) was what to take care of the delivery of goods, I highly advise the seller 0_0♡♡

    5
    J***m Verified Buyer

    It came quickly to who the area, about two weeks, the packing is small crumpled. Large runs when calibrating, on the bare iron shows that 8 to 9, and even more Micron, I drop as in the instruction does not happen.

    4
    M***q Verified Buyer

    The order came in a few days, after calibration, the pusher began to work at the professional level, measurements clearly and quickly, the Crown battery. I'm happy with the purchase.

    5
    F***x Verified Buyer

    I bought for 1971,75 rubles. Delivery Fast 7 days. Thickness gauge is good. The battery should be bought separately, 9 V crown, it is not included. Everything works. I liked it.

    4
    Q***n Verified Buyer

    Extremely high quality, very accurate, easy to use and has a very good, recommend to others who works and need a, delivery super fast also, arrived in less than two weeks

    5
    X***j Verified Buyer

    Not professional but for personal use excellent. The painted elements determine immediately. Good packing. On the photo measured Passat B8, instruction for Russian

    5
    A***t Verified Buyer

    Normal thickness gauge. Defines clearly painted and unpainted parts. I checked my car bought 2 years ago, thank God it turned out all as it was in the description.

    5
    U***x Verified Buyer

    Came quickly, there are no batteries included. Great price for universal thickness gauge. Good precision and frost resistance. Large and informative display

    5
    W***m Verified Buyer

    The thickness gauge is excellent. Very accurate. Included plate for calibration. Already calibrated. The size is a little bigger than I expected.

    5
    K***a Verified Buyer

    Excellent! Works very well! Very accurate! Like too! Recommend! Measures in Micron! Have aesthetic automotive and was an investment excellent!

    5
    P***l Verified Buyer

    I bought it to check the car when buying! I helped out and removed it from the redemption and lying sellers of the type is not a bit of paint!

    5
    U***w Verified Buyer

    Everything is fine! The goods reached about a month of Kazakhstan, checked on the car, shows correctly. Comes without a battery.

    5
    E***p Verified Buyer

    Thanks to the seller for quality and reliable packaging, the product is not damaged. Included no battery card job battery crown

    5
    L***u Verified Buyer

    Delivered in five. Packed well. The box didn't crumble. It works, the sellers of autochlama without measurements are scared.

    5
    H***h Verified Buyer

    It came to Barnaul in 8 days. Tried on the car, there is a small error, runs a maximum of 1.9mm, no longer shows.

    4
    I***h Verified Buyer

    Everything came, packed perfectly, instruction for Russian is, until. I used. buy a battery I will add a review

    4
    N***y Verified Buyer

    Corresponds to the description. Packed well. Delivery in 10 days by the delivery service DPD.

    4
    V***m Verified Buyer

    The device came 2 weeks before Barnaul All very well packed I recommend the seller for speed.

    5
    K***e Verified Buyer

    Got there quickly. Not a bad thing, you can take it. Battery Type crown only buy immediately.

    4
    V***h Verified Buyer

    Came well packed. Batteries are not included. Bought a crown, put, checked-everything works!

    5
    C***t Verified Buyer

    All Super, delivery rocket, cool device, I advise, I advise, this is the top, I advise.

    5
    T***t Verified Buyer

    Thank you to the seller, the parcel came very quickly, I recommend the seller.

    5
    G***k Verified Buyer

    Accurate device, but went very long, somewhere two months in Kazakhstan

    4
    Z***d Verified Buyer

    Beautifully packaged, I must try it but the kit is very well done!!!

    5
    W***n Verified Buyer

    I have not checked yet, with the form of norms.

    5

    Certification: RoHS
    With Backlight Or Not: NO
    Model Number: TC100
    Range: 0~1300um
    unit: um / mils
    Accuracy: 3%
    Resolution: 0.1um / 0.01 mils
    Auto Fe & Nfe: Yes
    Power: 6F22 9V batttery
    With Calibration Function: Yes




    TC-100 Digital Coating Thickness Gauge Tester ultra precision 0.1um Resolution Measuring Fe/NFe Coatings Car Paint 0~1300um

    General Description:

    The thickness gauge is used to measure the thickness of the plated and coated sheet on metal, e.g. paint/enamel/ chrome on steel, paint and anodizing coating on aluminum/copper. The gauge takes the precision integrated probe, and uses principles of electro-magnetic induction and the eddy current effect, which automatically detects the attribute of substrates.
    The Gauge is designed for non-destructively measuring the thickness of coating and painting. It is essential for material surface treatment and widely used in manufacturing industry, metal-processing industry, chemical industry, commodity inspection area, and also able to work steadily in the laboratory, workshop and outdoor.

    -Features-


    Mini size, high precision.

    Multiple internatinal certifications: CE/RoHS/FCC

    Micron Level accurancy.

    Use for Fe/NFe

    Non-contact calibration

    Battery level indication

    Auto power-off function

    Powered by 9-volt battery (not included)

    -Application Field-

    The Gauge is designed for non-destructively measuring the thickness of coating and painting. It is essential for material surface treatment and widely used in manufacturing industry, metal-processing industry, chemical industry, commodity inspection area, and also able to work steadily in the laboratory, workshop and outdoor.

    -Kindly Reminder-

    1>We always have enough products in stock.Welcome your order anytime.
    2> We are factory over 8 years, OEM offered, welcome your big order!
    3> Allthe parcels was sentby registered Airmail with valid tracking number.We will track it until you get the parcel.
    4>All of our products are under 1 year guarantee.
    5>Battery is not include in the packing list. We sincerely hope you can understand, andbuy the batteries in your local store or supermarket.