Photon Mono 3D Printer Uv Resin Printers With 6 Inch 2K Lcd Screen & Fast Printing Speed 130X80X165 Mm

Ordered the printer on August 10. The seller gave two track numbers, on the printer and on 2 kg of resin. Took the printer from PvZ on the 17th. But only the printer came, no resin. Wrote to the seller, he said "Wait." I had to quickly look for resin in the city, because I wanted to print it. There's a week, a week and a half, the track with resin is not moving. Wrote to the transport company (DPD) those said that the parcel did not arrive. I turned to the seller, but we did not understand each other. I think I'll wait another week, but even after another week the track didn't move. Decided to ask more radically that "file for the search for the parcel, or should I return the difference in the price of resin ask?" Then the seller moved and on August 29, the track went. And only today (September 5) the resin finally came. The printer is good, prints chic, adjusted only the level of the table on the paper and in the fight. The Z axis was loud at first, but quickly accustomed to this noise, even on the night of printing. The noise of the Axis was not particularly annoying.

Specifically did not confirm until I checked everything in the case. First my printer, took elegoo resin for 1800 per bottle on sale 11.11. The printer is very easy to use, the test model specially printed not from the flash drive on downloaded from the syngevers and sliced into the litchislyser to check the screen. Excellent quality-since the printer is the first, live never saw printed models-detail is beyond praise. For 18 k for which I was urining it on sale (together with a launderer station) is just a magical option. The only thing I really did not like is that the printer prints at least something or not you will understand after about 2 hours of printing-only then the table rises to sufficient height and you. This is minus all SLA

The delivery took the mayge city, Bo is more than a dovgo us to be timed. I'll give you a curfew of one-to-one shopping place, knowing the place of diyati, calling on haryachu leinya Rosan mayge men. 7 days later, mitnitsi was overtaken by the night, and zatrimana was taken by the time of the reception. Rosan zadnimi numbers entered the track Informa, about those, the shield of the swallows went through the design of the day. The reception trivalo Che 5 dnev. In the Kincey result of the Bulo narahovano 555 GRN Mita, chomja Duzhe Radiy, Bo for the printer paying trochi menx$ Yakyust druku can beat in the photo. All the boxes.

The printer came, went for a very long time, 14 days already, delivered to the shop peterochka, a week of fun status is expected to arrive in peterochka, then, then Seems to be working. It came with a gray resin, a Besik, they write crunchy, but they prick, but there is a percentage of the bend, and the resin is very strong,,, probably everyone compares with metal) took a printer for growing dopas to auto models at 1:24 and 1:25. By the way, unlike you all, I did not print a cube, did not it be lazy to print it to you all? Is it not a lion to take a normal model, and immediately print?

The AnyCubic Mono Is an awesome machine. I have used a few resin printer’s now, and this one is a good entry point for most beginners. The cure times are quick, the maintenance is straightforward, and it establishes a good foundation, For moving to more advanced models. The 2K screen produces very detailed minis and I am very impressed with the results. I would also suggest buying the wash and cure with the unit. It makes it much easier and improves The post processing process. Overall, I highly recommend this machine it’s hard to find a better bang for your buck.

Very cool thing easily and quickly figured out how to use! Everything came in whole to SPB reached the week the resin which purchased in the kit sent separately it was going 2 weeks (I came Gray) so that the week was just admired to them them I already printed a lot of the program for slide on the flash drive in the kit davolno simple and understandable but I advise you to watch the video of tutoryuala on on on This is not my first printer from anycubic to this took FDM so this is my first photopolymer advise an excellent thing!

As the first printer is not bad. Before Ukraine went from Germany. customs detained for a month (hate customs). Slightly repainted the console to the left, but this is not deadly (most likely it will be necessary to look at the console adjacent to the carriage rails). The printing speed of the local photopolymerom-2.6c, I'm quite satisfied. I think to the output photon ultra-I will Master photopolymer printing

Printer-Super, only chitubox does not correctly consider the working time. And he goes very loud on Z. This buzzing sucks. I will disassemble, look at the possibility of replacing the driver for a quiet one. And very pleased with the delivery-in Perm for 5 days. But the resin was driving for a week.

Great Great Great, thank you. It looks awesome, not tested yet but I m sure it will be good, very very good packaging, no what zo ever damages at the outside or inside, very very very fast sending from Germany. I will come again to order anotheone , I believe. Thank you, good seller

They ordered the printer not for themselves, but as a gift, so there are no photos in the assembled form. The parcel came quickly, delivered by courier to the threshold. From the words of the one who was given-everything is fine, there is no marriage, the test cube is well printed

Sent in three deliveries. The first one came by mail in 2 days. In the second courier brought the printer. In the warehouse there was no resin and offered to replace it with vegetable. I came to the Post Office in 2 days. Satisfied as an elephant)

I think the best choice for my price. To choose a program for work was not difficult, and on the internet there are full of reviews, recommendations and reviews. Got to me quickly and in reliability. I was just perfectly packed.

The order split by the seller in two parts. One the 3D printer and one the wash & cure 2.0 The printer arrived in the 7days range but the ws 2.0 had 6 days delay. Also the 2nd package didn't had a delivery address (my ) on it.

Delivery to the door DPD within a week to Arkhangelsk. Printer working. Improvements: you need to print a cover for the bath, a holder for draining the resin from the table, and paste the film from the flowers on the screen.

Pretty fast delivered. Not as noisy as it seemed, you put in another room and almost can not hear. You get used to the smell, and not so strong. Prints very cool, nice to look at printed figures.

Chic set, ordered everything. Set the norm for the length of the formation of the layer behind the branch longer, as written on the bottle on photopolymer, and the quality is guaranteed

Sent fast, arrived on time, packing good. I pulled a test cube from the box. Corresponds to the declared characteristics. A beautiful space for creativity, limited only by imagination.

The printer is just super. Mist exotr and customs is just * ope week in Ukraine and a month on it paid extra. At customs at 978 UAH. When buying a printer with resin 255 Dole.

The printer came in a week from the Russian warehouse. Bought in the kit random resin, put white. The kit matches. I have not yet printed, I will add a review later.

Qualitatively assembled printer, packed correctly. Clear instruction. I have not tried to print yet. After printing, I will add a review. Thank you anycubic!

Very long shipment. I had to extend the time twice. The resin came in a separate parcel, fell behind the printer for 2 days. But overall satisfied!

Everything is super, as always. Very fast delivery to the apartment, everything works perfectly!

Very fast shipping with tracking. Perfect seller. I recommend ++++++++++++++++++++++

Perfect and test in the wake with the test model on the key very satisfied

Excellent! Very satisfied, in the future I will still order