Ph Meter 0.01 Ph +Battery/Powder High Precision Water Quality Tds Ec Tester 0-14 Ph Measurement Range For Swimming Pool
- 138 reviews
- 2964 Sold
Customer Reviews
*Note: Some reviews have been processed by Google Translate!Certification: CE
With Backlight Or Not: NO
Is Smart Device: Yes
Model Number: PH Tester
Display Type: DIGITAL
Type: EC Tester
Probe type: low impedance glass sensitive bulb
Automatic recognition and calibration function
Anti-corrosion housing
Measuring range: 0-14.00Ph
Resolution: 0.01PH
Error: 0.05PH
Working temperature: 0-60 degrees Celsius
Dimensions: 155*31*18mm
Battery: 2x1.5V(LR44 button battery included)
Instructions for use of PH calibration powder:
Calibration powder: pH standard solid substance.
It can be used after adding water.
Suitable for the calibration of any type of ph meter.
Each package can prepare 250ML standard solution.
Package included:
1 x PH Meter 0.01 PH High Precision Water Quality Tester with 0-14 PH Measurement Range, Suitable for Aquarium, Swimming Pool, Indoor Outdoor
3 x calibration powder
1 x instruction manual
EC Features :
- Hold Function
- Auto shut-off function
- Automatic temperature compensation
- Mode shift : mode1-PPM&° C, mode 2-us/cm&° C , mode 3-ppm&° F, mode 4 -us/cm&° F
- Conductivity: 0-9999us/cm
- TDS: 0-9999ppm
- Celsius: 0.1-80.0 ° C
- Fahrenheit: 32.0-176.0°F
- Accuracy: ±2%
- Net weight: 55g
- Size: 153 x 30 x 14 (mm)
- Battery: 1x3V CR2032( included )
- TDS,EC,Temperature testing function
- Lock function
- Automatic conversion function
- 5 minutes automatic shutdown function
- Remove the electrode protection cap.
- Press the ON/OFF key, place the electrode into the solution to be tested;
- After the value is stable, press the HOLD button to take out and reading;
- After finished, press the ON/OFF key, wipe the electrode clean, and insert the electrode protection Cover;
- Due to the different production, the carrying bag might be different from the picture, but it does not affect the usage of the TDS&EC meter, please understand.
Total Dissolved Solides (TDS) are the total weight of all solids (minetals, salts, or matals) that are dissolved in a given volume of water, expressed in milligrams perliter (mg/L), or in parts per million (PPM).
Item Type: TDS Water Meter
Material: Plastic
Measurement Range: 0-9999 ppm
Accuracy: +/-2%
Temperature Range: 0-50 celsius
Battery: 2xLR44 batteries, 1.5V( Included )
Size: 155x31x23 mm
1. Check the performance of your water filter.
2. Check for nardness (1 grain = 17ppm).
3. Make sure you always drink pure water!
Please refer below standard for testing water
0-50 ppm --------- High Purity Water
50-100 ppm ------- Pure Water
100-300 ppm ------ General Pure Water
300-600 ppm ------ Fouling
600-1000 ppm ----- Poor Taste Water,Fouling
Above 1000 ppm --- The water is not suitable for drinking
1. Hold function: Saves measurements for convenient readign and recording
2. Auto-off function: Turns off meter after 10 minutes of non-use to conserve batteries.
3. Measurement Range: 0-9999 ppm (When the measured value exceeds 999 ppm, please make the display value x10)