Original Raspberry Pi 4 Model B Kit 2 4 8Gb Ram + Fan Aluminum Case + 32 64 128Gb Tf Card Power Adapter + For Pi 4
- 140 reviews
- 562 Sold
Customer Reviews
*Note: Some reviews have been processed by Google Translate!Demo Board Type: ARM
Certification: RoHS
Interface: TF Card Support
ROM Capacity: None
Memory Capacity: 4GB
Processor Brand: BROADCOM
Model Number: Raspberry Pi 4 Model B
Intergrated Feature: 10/100/1000Mbps
USB ports: 2 x USB 3.0 , 2 x USB 2.0
CPU model: Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
Memory: 2GB, 4GB or 8GB LPDDR4 (depending on model)
LAN: 2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/ac wireless LAN
Bluetooth-compatible: Bluetooth-compatible 5.0, BLE
SD-compatible card: 32GB , 64GB , 128GB or No Card (optional)
Power adapter: 5V 3A output , On/OFF switch button , EU/US/UK/AU Plug
Case: Aluminum Case with fan/withou fan (Optinal)
RAM: 2GB/4GB/8GB Optional
Original Official Raspberry Pi 4 Model B Kit 2/4/8GB RAM Dual Fan Aluminum Case + 32/64/128GB SD-compatible Card + Switch Power Adapter + Heatsink + HDMI-compatible Cable for Raspberry Pi 4
Please note that if you choose ship fromRU, there is only A1 case and EU power available.
Introduction :
With the huge increased performance of the Raspberry Pi 4 , the heat dissipation is more important. So we provide this Raspberry Pi 4 set with the dual super cooling fan aluminum case. You need not worry about the heat dissipation when use this case. The ultra thin design also make it be popular. If you don't like the fan module, we also provie the aluminum case without fan to choose.
Pleasse leave a message in order payment page "message for seller" that which case do you want, otherwise we will send case A in default.
Choose a bundle you want :
There is 9 different bundles to choose , please choose the suitable bundle you want.
What's more , please leave a message in the order note for the power plug ( EU / US / UK / UK ) you want.
Packing List :
1 x Raspberry Pi 4 Model B (optional 2GB,4GB or 8GB RAM)
1 x Aluminum Case
1 set x Thermal Pads
1 x Screws Pack
1 x 5V 3A Switch Power Adapter
1 x 1.5M Micro HDMI-compatible Cable
1 x Micro SD-compatible Card (optional 32GB,64GB,128GB or No SD-compatible Card)
1 x USB Micro SD-compatible Card Reader
Dual Fan Aluminum Alloy Case
1. Expand the heat dissipation area , say good-bye to over heating problem.
2. Low power consumption design,energy-saving.
3. Quiet cooling fan, no noise.
4. Effective fan with high quality
5. Update thermal tape , provide best heat conduction effect.
6. Thick aluminum alloy material can protect your Raspberry Pi very well
7. The open design make the case don't block the WiFi signal , also help heat dissipation better.
And all interfaces/ports are remained
8. Easy to install , we provide a mini screwdriver to help you install it.
Aluminum Alloy Case
1. Expand the heat dissipation area , provide well passive cooling.
2. Update thermal tape , provide best heat conduction effect.
3. Thick aluminum alloy material can protect your Raspberry Pi very well
4. The open design make the case don't block the WiFi signal , also help heat dissipation better.And all interfaces/ports are remained
5. Easy to install , we provide a mini screwdriver to help you install it.
SD Card
1. Class 10 high speed
2. 32GB , 4GB , 128GB capacity to choose. You can also choose the option without SD-compatible card.
3. Provide USB SD-compatible card reader.
If you don't know how to install the system to SD card , please refer to : https://projects.raspberrypi.org/en/projects/raspberry-pi-setting-up/3
Power Adapter
1. 5V 3A output provide enough power for your raspberry pi enven if you use lot of device on your raspberry pi .
2. There is the ON/OFF switch button on the charging cable to control the power conveniently ( press button to open , push again to close ) .
3. EU , US , UK , AU 4 kind of power plug , 100-240V input are suitable for most countries all around the world .
HDMI-compatible Cable
1. Micro HDMI-compatible male to HDMI-compatible male
2. Length : 1.5m approx
3. 1.4 version
4. Use for connect Raspberry Pi 4 to TV/monitor (with HDMI-compatible port)
Raspberry Pi 4 Specification:
Processor:
Broadcom BCM2711, quad-core Cortex-A72 (ARM v8) 64-bit SoC @ 1.5GHz
Memory:
2GB ,4GB or 8GBLPDDR4 (depending on model)
Connectivity:
2.4 GHz and 5.0 GHz IEEE 802.11b/g/n/ac wireless LAN,
Bluetooth-compatible 5.0,
BLE Gigabit Ethernet
2 × USB 3.0 ports
2 × USB 2.0 ports.
Video & sound:
2 × micro HDMI-compatible ports (up to 4Kp60 supported)
2-lane MIPI DSI display port
2-lane MIPI CSI camera port
4-pole stereo audio and composite video port
Multimedia:
H.265 (4Kp60 decode);
H.264 (1080p60 decode, 1080p30 encode);
OpenGL ES, 3.0 graphics
FAQ:
How to choose the case I want ?
Answer:
Please leave a message in the order page for the case you want. Then we can see it when ship the order. ( In the confirm order pages, you can see the location of the message box )
How to use the Raspberry Pi?
Answer:
You can go to the official website of Raspberry Pi to learn to use the Raspberry Pi, the link is:
https://projects.raspberrypi.org/en/projects/raspberry-pi-setting-up
https://projects.raspberrypi.org/en/projects/raspberry-pi-using