Nonmagnetic Pure Copper 900M-T Soldering Iron Tip For 936 Soldering Station Soldering Tips With 936 907 Sleeve Casing

I took the kit for Lukey 936d. The native nozzle quickly came into disrepair and in order to avoid repeated shots with the nozzle, the last put on the glue. For years I used it until I ordered this set. The nozzle from the set is slightly shorter than the original. And I do not know if that's why or not, but now it became comfortable to melt at about 260 degrees (with a native-had to fry up to 350). Do not pay attention to the damage to the "skirt" of the new nozzle-after cleaning the glue had to essentially cut the thread on the handle. I have not tried new stalls yet, I'm waiting for the right moment. I'll just note that the guilds (inside the metal sleeve)-according to the assurances of a friend, it's normal. Delivery 10-12 days in the combined parcel. Thank you.

Made an order with the seller on March 28, 2022. In the complete set the module of the holder has a soldering iron and a set of copper stills. The tip is made of copper, inside a steel sleeve. On the heating element sit down with a small gap. The module of the holder of the tip perfectly twisted on the soldering iron from the soldering station Lukey 702/898. No Lufts, everything sits tight. Copper gills also normally sit on the heating element, do not hang out. I did not communicate with the seller. The seller sent the parcel not very quickly, but to the post office in the Moscow region the parcel arrived in two and a half weeks. Seller recommend.

Diameter outer 6mm, inner 4.1mm. Inside, the steel insert should get rid of the prickles, did not yet have time to chase. The kit is suitable for this soldering iron but it is better to change the whole thing. The sleeve (holder of the tip) is slightly shorter than the native one and the nut is twisted not completely but with complete copper gills a little better because. They're a little shorter, too. Another minus is that there are no vents on the sleeve. Threaded parts are steel, but tubular or those. Stainless steel or something with a magnetic coating (it takes very little).

It's a good product, arrived in a good time (around 2 or weeks I don't remember exactly the time) to Mexico. materials are good except for one piece, it has a tiny hit, it can be fixed anyway and I understand that is due to the shipping. The slave is good and it fits good

Good. No magnets powerful neodymium magnet. Thin steel insert. Copper much much thicker steel insert. No ventilation slots on the sleeve for soldering iron, unlike the original bushing. And the comment was helpful, say that fit the soldering iron outmotd as a family.

Good quality copper tips, for tin welder, meet the promised, the inner measurement is 3,85mm. And it's lined with a different metal shirt. After testing it, I have to say the result is satisfactory, so I recommend

Got it earlier than expected. It's like the description. All tips as in the photo. Looks like copper. In the process of operation I will try to complement the review.

Product received, fast delivery, good attention from the seller, I will follow the seller, in short... highly recommended product and seller.

Received all ok, everything matches what is described in the publication and visual inspection, lack to test them to see the quality. Thanks

3 weeks in Rostov. Like copper. The soldering machine from me is so itself, so I can not say whether it's good or not.

Order to the Ryazan region reached in 2 weeks, qualitatively packed, everything corresponds to the description

The order came quickly to Tula at the point of issue in 1 week all corresponds to the description.

Shipping was well oochen long. But it is not the fault of the seller. Product quality, not used.

The order came in 17 days, everything went well, the quality is good, thank you to the seller.

Excellent, the sleeve is present. At 907A rose as native. Definitely I advise you to purchase!

Delivery to St. Petersburg took 3.5 weeks. The kit corresponds to the description. Thank you.

Good stalls, ludyat excellent, perfect fit for Lukey 702, delivery 22 days by joint parcel.

Part of very quality nice order received on time and good seller good Warehouse

The goods received this is what I need to thank the quality is excellent.

It came quickly to the appearance of sound check I will complement

Excellent stout, ironed cool, better than regular black at times!

Copper tips seem to be of good quality. Arrived very quickly.

Came quickly a couple of weeks to 8586 fits without adapter

Not bad for this price. Delivery 2 months. To Odessa

Good stout, good slump. Approached without problems

Very fast shipping, product as described!!! A+

The parcel came quickly dressed with others.

Thank you very much for prodovtsu good work

Good stalls, I use them all the time.