Hi there. There's something to tell. Ordered and I'm a bear, delivery-lightning, very, very fast. This is my second printer, the first Ander 3 pro, so experience is in printing. I collected the video of the handpriest, everything on the case and without excess water, the main thing is do not hurry to tighten the fasteners. I'm printing the second day. Table with failure in the middle, treated with Z-offset setting in the chicken, this is no problem. Today, in the middle of the print, the plastic was stopped, there was a cork due to the molten filament in the nozzle it was unrealistic to take it out of the extruder. I had to disassemble it-the screw of fastening the axis of the extruder motor to the feeding gear and slipped. Tightened and everything is OK. In short, if you understand what and how it works, then all these are trifles. Prints well, and this is the main thing. Immediately lubricated the axis and bearings with Lithol 24. I am pleased with the purchase. Good Machine. Yes, and by the way, the drivers are replaceable!, it means to be the director and modernization. Do not doubt, take and enjoy. Boldly recommend and thank you for reading to the end

Ordered at the time of discounts 28.11.202 the price with discount came out 17696 rubles. For a very long time they processed the order. I asked the seller to bring the complete set with not unpacked drivers, as I plan to change 1, loud drivers a4988 and replace Bowden with a direct driver. The seller replied within 24 hours correctly, politely, failure! Sent from a warehouse in Moscow 07.12.21, delivered to the doors of the apartment in lenoblast 12.12.21 by the DPD track was tracked. The first thing I went to look at electronics, saw that the MKS Robin nano v 1.3 board, with removable drivers (the board is not a copy of reborn V2. 0, A it was Robin Nano) calmed down and left the printer for a week to stand. I collected 19.12.21 in 4 hours with a snack slowly, lubricated all the bearings with a liter, collected according to the instructions of the site amperk. Ru (attention there is a typo, fastening the wire with a screed motor X, not u as written). In the Assembly very much helped a set of incisions from Bosch in the photo, almost all sizes are suitable. In the kit were all screws, but one key is not. Test PLA from the set.

The printer purchased on sale Black Friday 18300 rubles. Shipping 7 days delivery to Kuzbass 7 days to door. Packed perfectly on the road do not damage the assembly of a lot of video anything difficult all is already assembled almost (I recommend only to buy small size hexagon) in the kit they. You do not need to tighten anything in the kit a lot of everything for printing (spatula, Clippers, tweezers, needle) even spare nodes of the printer, etc. The printer prints straight from the box. Downloaded Cura octopus printed from the first time changing only the temperature according to the recommendations of PLA 210 degrees. With the snake, it was fired 4 times, ran 1-2 segments after changing the speed and width of the printing of the first layers, adjusted the table and printed without problems. In general, there are many problems and they in the print settings they need to be read and studied. The movement of the printer head on all axes is quiet through the day of work is no longer felt except for the squeak of the filament retractor but bearable. Seller reply timely.

For a long time I looked after and decided to buy on the autumn sale. In order I share the impression. Delivery was from Moscow to the Post Office in Balashikha. It took 12 days. This is a long time. Of them, 7 days did not send J-net/8Express, constantly there were excuses, but they wrote tirelessly every day. Finally, they passed the order by mail, everything went like oil, but then hung on sorting in Balashikha for 4 days. I was very tired during this time, worried that the crumpled parcel and the printer with the unpacked drivers would come. In general, took in his compartment, there was a noticeable dent on the box, which did not affect the integrity of the contents in any way. Packed all sooo good, commendable. At home I opened, quickly through a click I looked at the board and wept, but then there were tears of happiness-a fee with replaceable drivers, and so there will be a driver. Everything was collected for the evening of nespesh, turned on, there are no visible faults, the drives work, the seal has not tried yet, but I'm sure that everything will be

I have in the basement: flyingbear reborn v 2.0 board, 2 drivers of quiet, two loud, BPS Chinese ordinary, fans quiet. I recommend when assembling to remove the bottom cover and tie the power cable that lies directly on the Z axis shaft. Otherwise, when assembling, you risk breaking the wire with a shaft, and He +. It can not be bad to shoe and stay without a printer, because the case is grounded. Blowing it to the side of the model, but the nozzle will not create problems on it. Prints perfectly immediately. No settings are needed. Just turn on the printer in the chicken, choose the quality and print. I am an experienced printer, this is the fourth printer already. Wi-Fi found immediately, Russian Russian in places. Please note that the shafts should be fixed both from below and above!!! One type and so printer filed, thought x'd marriage I did not have to communicate with the seller, it came to the post office in five, which at all deserves a separate epic. But okay. Prints well, came whole. In the kit there are spare parts.

My first 3D printer, easy to assemble. Printing quality, surpass all expectations, use in printing easily, so easy to learn more filigree operation, has 2 of 4 drivers tmc2208 other a4988 will Although I dreamed of all 4 quiet drivers. The interface is simple, in the kit there was an SD card SanDisk for 4 GB, through the card reader files the printer does not see them, but when recording through WiFi, it is perfectly, similar result when changing a card, works in the FAT32 file system, (exFAT is not). When the power cut, the Seal continues from the same point, of course, the drop can not be avoided. But if the file is on the flash drive and transmission through the cable, then when the cable is broken and the Flash is in a friend's connector, the connection is lost. Isopropyl clean the table, does not affect the printing much. I printed not one detail, but from complex yet only the lion. The head did not change. The seller is responsive and answered all questions and doubts. Thank you seller.

Delivery to Moscow is about two weeks. Took from the store the intersection, heavy, take a cart or a car to pick up. I collected in half a day and then set up a couple of times and finished every kind of stuff. It is better to see a full video about the assembly than the undressed overseers because of them had to twice disassemble the printer, because-that something forgot or not. About setting up the table in general, not a word, would kill such callers. Firmware 5.8.4, there are already new ones. At once I'll say print a snake for the train, for the gofra is a tin full. Printed pieces of 10 different small models, there is still a little plastic that was included. In general, I'm happy, I want to make doors, although even with an open window in-7 prints perfectly.

For a long time he asked the seller for a board with replaceable drivers, in the end he refused, but eventually sent from a warehouse in China, I had to wait for not much longer and longer The quality was even better than I expected. Power supplies are now not minvel, completed-put mica instead of termorezina is less heated, put direct with NEMA 14. When printing ABS, begin to soak the detail with alcohol with water already at table temperature 70g otherwise ultrobasis is drained at full cooling. Best in the world service and technical support, fulfill warranty obligations without problems. I recommend flying bear!!

I made an order at 11.11.21 for express delivery in Russia to the Moscow region. The parcel went only after 6 days, like from a warehouse in Russia (maybe because of the loading of the day-related sale, I do not know). The seller answers questions quickly. The parcel reached 24.11.21. A small remark-a broken hole in the box, it seems that something was pushed or hit a sharp angle, I attach photos. Very lucky that on the side and nothing hurt and stopped on the protective soft plate. Inside it is packed qualitatively, until it collected. I will complement the review after assembly and trial printing. Thank you.

Delivered quickly, well packed, complete with all the details and fasteners, a board with replaceable drivers. Test sample printed PLA-plastic from the kit at standard settings immediately after assembly, the quality is good. It is desirable to change the direct and replace the drivers on the z axis and the extruder on a quieter, otherwise when retracts, a very strong squeak is heard. You can not change the x and y axis drivers.

For a long time I wanted a 3D printer to myself home. What is a 3D printer and that he knows how to imagine. At work there are Hercules and picasos. The printer delivered days in 8. it was not difficult to collect. The printer interface is simple and clear. Slicer also was not very difficult to set up, sending to print over Wi-Fi is very convenient. A little photo of what I printed.

Very good seller, quickly sent and quickly delivered. It's whole. The printer slowly collected in a couple of hours. It prints not bad, the only thing with a long print in the feeding mechanism is untwisted guzhon fixing the feeding gear, as a result, the plastic stopped playing and went off. Total disassembly and washing of the nozzle and hotend helped. The printer is back in line.

Seller handsome! Ordered 11.11. Sent printer 12.11, and until 23.11-silence... Well, I think-all, printed... Started to take out the brain to the seller already somewhere from 16.11. He patiently, but strongly recommended waiting... Yeah! I wrote such poems to him there... Without mat, cultural. But... Hysterics, shorter

This is my first printer. Looks solid, heavy 15 kg, steel. I found my place in the kitchen. I was picking up a few hours, so long because I had to constantly look at yutub. In the kit Vplus SD card, Clippers and a little plastic. Leveled minutes 5. after that immediately began to print. Like all the rules.

Waited for long 50 + days. But thank God I waited. Everything came whole, collected with difficulty, because one hexagon was not included. I print a couple of days with a test filament, while everything is fine. It is important to adjust the table and the distance between the nozzle.

Came in 11 days. I was lucky and a 1.3 scarf with replaceable drivers. Be sure to check under what voltage the BP is set, I have a thought visited for a couple of cm from the outlet. Delivery to the five here well, not very much. For 300 presidents it would be possible and Courier (

The printer came in 11 days in Orenburg, while the seller did not send it for 7 days, the fee was caught with replaceable drivers. Of the jambs, there was no hole in the coil holder and very soft hexagonal in the kit. After the Assembly immediately printed the test Bolt.

Delivery fast, courier to the apartment. Packed securely. The printer is good, my son liked it. This is the second one, it has something to compare with. There are possibilities for an upgrade. The seller is sociable, he answered all questions immediately. Recommend.

Sent pretty fast until I collected I'm going to finish and finish Bought for 18 K in late November 2021 There are 2 quiet and 2 loud drivers, I do not know well or not, but it seems if 4 quiet unpacked then you can not put a new Marlin. In general, the quality

The printer received, the drivers are removable, for this thanks!) but when assembled, I found that the belts are generally sluggish, not stretched. It turned out that the frame was bent, until I knew how to fix it, without damaging the body... It's sad...

So the printer is very well packed and quickly arrived. Is ever real top! The only thing I to find fault is that you cannot directly lot can print, but only a few changes in the firmware make must… But the printer is super and shipping went scrape Fatz.

Come quickly. Well packed. Collected with the child in half a day, simultaneously shot) everything clearly prints, right from the box, collected the child from the races, I helped. Thank you)

The printer is very good. Test detail prints perfectly. But under their projects already the print profile needs to be selected more carefully. For abs, you need to build a cap.

Bought for 20750 rubles, delivery to Moscow in 8 days. While the printer is going, I advise you to study 3D modeling, there are no normal models in the usual internet