The product is exactly as in the pictures. However, it is a pity that there are no instructions in any other language but Chinese (Mandarin?!, I apologize from before if I made a mistake identifying the language). 2nd: the wire connector; better without one, as I have to change it anyway, for a pair. 3rd: the pipe connection bracket is not really round, and it need some clearance for the pipe to be able to fix it (if the pipe is close to the wall). 3 weeks from Spain to Romania?! a bit too long.

Came quickly, ordered two. the track is tracked. It came in 14 days to Mozyr. One minus that the plug had to be replaced with the terminal for the unit. I made two genzna in the second, respectively, changing polarity. Skonectil with the mortar through the Akara relay and the leak sensor script. You only need to buy a second block to open, still automatically. Implemented as in the photo. The mechanism inside is metal, but there is Luft vvkrkh and down, not critical.

Received in 10 days in the pedestal of Pyaterochka. The packaging is very weak, fell apart in trash. All the hardware spread out on the package, at least the package did not break well. There is a small instruction in Chinese and some Chinese inscriptions on the case At work I'll add later, if something goes wrong. I advise the seller to take care of more reliable packaging.

Received in 10 days in the pedestal of Pyaterochka. The packaging is very weak, fell apart in trash. All the hardware spread out on the package, at least the package did not break well. There is a small instruction in Chinese and some Chinese inscriptions on the case At work I'll add later, if something goes wrong. I advise the seller to take care of more reliable packaging.

The automation of the city is 12 volts with a mixed pole. I think Yak Teper Yogo piukquchiti shchob MiG krivati and kratkovati automatic. There's a folder without a lighthouse. Dovoli is an important and minced weapon. I think it's a little Luft on the six. I recommend it. I'll get into the maiboutom of him pratzyuwati. I'm selling it!!!

Good thing. It came normally on time. It is controlled by a constant of 12 V in two polarity. To twist in different directions, you need to change the minus with a plus of places. I was picking up a circuit to control it on the relay, to change polarity. The power is enough to twist the ball valve for 24.

In one direction it works as necessary, but in the opposite mechanism it is designed so that most likely the motor will not turn off and will stand buzzing. I had to disassemble and remove the rocker button "end" to correct the defect. Most likely it is a mass problem due to design shortcomings

Nice and useful security Shut-off valve hardware without logic that works on 8 to 16V DC. Can be any type of toggle-joint for 1/2" till 1". Recently English manual is missing on almost all products delivered by Ali Express, hence for outside China these products are becoming unusable.

I received the product of the order within the normal shipping period, without delays. It was well packaged, with no apparent damage, yet I have not yet tested the operation. I recommend this seller.

Everything works. Motor force-hand stop is quite difficult, the current is 50-70 Ma without Crane, when trying to stop the hand reaches 150ma

Perfect. Just check the internal race terminals, make contact when appropriate. It works very well.

Seems good, install later. But the Chinese manual isn't helpful...

We need to work out the ends. Force fire. The gears are metellic.

Packing leaves much to be desired.

Until I installed it.

All fine

Is OK

OK