Led Dimmer 12V 5V 24V 36V 8A Pwm Wireless Rf Switch With 2.4G Brightness Adjustment Touch Remote For Led Single Color Strip
- 139 reviews
- 353 Sold
USD $11.13VAT Included50% OFFFree Shipping
Just for Dropshipping and Wholesale
Customer Reviews
*Note: Some reviews have been processed by Google Translate!Material: ABS
Certification: CCC,ROHS,FCC,EMC,ce
Features: 12V LED Dimmer Wireless
Max. Load Power: 288W
Model Number: 2.4G LED Controller
Item Type: Dimmers
Warranty: 2 Years
Working Voltage: 5V 12V 24V 36V
Output Current: 1CH,8A
Used for: Single Color LED Strip Light
output Signal: RF(2.4G)
Remote Distance: 30 Meters
Feature 1: led dimmer
Feature 2: dimmer led 12v
Feature 3: LED Dimmer Switch
Feature 4: 12V Switch Dimmer
Feature 5: pwm led dimmer
Feature 6: led dimmer 24v
Feature 7: Smart Dimmer Switch
Feature 8: Touch LED Dimmer
Feature 9: Wireless PWM
LED Dimmer 12V 5V 24V 36V 8A PWM Wireless RF Switch with 2.4G brightness adjustment touch Remote for Led Single Color strip
Features:
● Remote control or connected with external push switch to achieve on/off and dimming function
● Ultra sensitive brightness adjustment touch slide
● Smooth dimming and switch without any flickering
● Auto-transmitting function: Controller automaticly transmit signal to another controller with 30m control distance
● Synchronize on multiple number of controllers
● Magnet on the back which can be easily stuck on back holder or any metal surfaces
Technical Parameters:
LED Receiver(LSD-V1)
Input voltage:DC5V 12V 24V 36V
Input current:8.5A
Output voltage:DC5V 12V 24V 36V
Output current:1CH,8A
Output power:40W(5V)/96W(12V)/192W(24V)/288W(36V)
Dimming level:4096 levels
Dimming range:0 -100%
Dimming curve:Logarithmic
PWM Frequency:500Hz
LED Remote(LSD-R11)
Output signal:RF(2.4GHz)
Working voltage:3VDC(CR2032,Without battery)
Working current:<5mA
Standby current:<10μA
Remote distance:30M
Match Guide:
The dimmer can match with all kinds of single or multiple zone 2.4G RF dimming remote controller.
Choice 1: Use Match key
1. Match: Short press match key, within 5s, press on/off key of the remote.
2. Delete: Long press match key for 5s, delete all matched remote.
Choice 2: Use Power-up
1. Match: Switch off the power, then switch on power again,short press on/off key 3 times on the remote quickly within 5s after power on, the link is done once the light blinks 3 times.
2. Delete: Switch off the power, then switch on power again,short press on/off key or zone key 5 times on the remote quickly within 5s after power on,the unlink is done once the light blinks 5 times.
Push Dim Function
The provided Push-Dim interface allows for a simple dimming method using commercially available non-latching
(momentary) wall switchs.
● Short press:
Turn on or off light.
● Long press (1-6s):
Press and hold to step-less dimming,
With every other long press, the light level goes to the opposite direction.
● Dimming memory:
Light returns to the previous dimming level when switched off and on again, even at power failure.
● Synchronization:
If more than one controller are connected to the same push switch, do a long press for more than 10s,
then the system is synchronized and all lights in the group dim up to 100%.
This means there is no need for any additional synchrony wire in larger installations.
We recommend the number of controllers connected to a push switch does not exceed 25 pieces,
The maximum length of the wires from push to controller should be no more than 20 meters.