Diy Wood Electric Trimmer 800W &Amp; 2000W Milling Cutters 8Mm For Wood Hand Router 6.35 &Amp; 8Mm Electric Tools Kits Ru Eu Warehouse

Very fast delivery. The trimer is excellent, of course not 2000W in real life approximately 600-700. In the kit all as in the photo. Interchangeable in bases with my Tesla tre710 (and I think similar), they look like one factory do. The base of this is even better than on Tesla. How will I show myself in work I do not know, but for such a price a good trimer. Smooth start is present. Of the shortcomings, the bad Collet is 8mm better then buy a good one, and the second Collet is 6,35. But I have from Tesla and 6 in 8 and even 10mm, so now I can take any milling cutters at least 6, at least 6,35mm. I recommend such a crumb.

The order was sent for a long time, for that came in two weeks. The equipment corresponds. The parcel is whole not crumpled. The metal part of the milling cutter is parted. The base is poorly adjusted in depth, incorrect milling. I can't see from the side. Very hot. I bought a new base went perfectly. Changed the bearings, now it does not heat so much. There are constant electronics. Two collets. One 6,36 other short 8mm. I bought for 3600 rubles. I like the tool.

Shipping sdek, very quickly. Only 3 days. Accessories in the description. There is a smooth start. Stepless adjustment of Rev. I got a copy of a normal base, no burr. After pulled nut adjustable wing, elevator began to work normally. Mill liked, worth the money. Purchase would be completely satisfied, but tool arrived with a broken top cover case. Contacted, he promised to send a new item.

Arrived very quickly, sent to Moscow warehouse in county. region, essentially for 5 days arrived. Courier brought to the door. All included, as it is written. For this price is quite properly executed. Adjustable adjust, too much into the speed is not clear, but they change. Soft start there. Cons of-heated spindle, even at idle. The commentary from many problem.

No, well, that's a normal tool. But we have to finish. The elevator does not function. When you try to pull the milling cutter from the base-the carcass gets scratched and clears. We need to sharpen-grind. Collet for 8 and 6,35 in the kit. Box and milling cutter-without marking marks. Smooth start is. It will go for 3 jambs.

Got it second time. The first order could not send as it was not available. Contacted the seller, reordered. Everything came out, the packing is normal. The burrs took off nahfield, the microelevator to hell. Complete as in the picture. Collets under 6,3mm and 8mm. Two cutters. Stops and key.

The product has arrived well but does not bring the mounting instructions, just bring the cutting sheet. The spare coal brooms, come defective (items) please send me a escobil set the mounting instructions, if possible in language, in Spanish. On. Thank you very much.

Aluminum frame all in blocks and sharp edges. She clenched and did not move on the scale, until he cut the sharp edges, scented with thin skins and greased oil. After completion, it became normal to slide on the engine body. The scale was already scratched.

The device was delivered to Belarus by express delivery. Shipping is free. I did not pay the clearance. In work behaves perfectly. If you consider a lot and often use take more powerful. I liked buying a temper at such a price

It's been two months. Power from 60 watts per 1 to 280 watts per 6. ie maximum 280 watts instead of 2000. The elevator is terrible. Twist almost for beauty. But in general for such money to expect the best is not worth it

Iron fire. Stanina metal, everything is good. The canopy is shoddy, luftitis on the circle, but the chamfer removes easily. I checked on oak bars. Power plays a role, do not fall under load almost. Delivery two days!!!

The quality of the milling cutter is certainly not ice, but for $55 pvpolne for home use. Brushes spark, for Prof use for every day can for a long time not enough.

All match the description. You can take. There are two Collet, you can use the cutter 6, 6,35 and 8mm shank. Fast shipping (7 days) company sdek, to the door.

Thank you to the seller, she sent it. the delivery is fast. the description corresponds. The trimer for not long work, I have after five minutes on the hole.

Came to Ekaterinburg quickly. Externally, the quality is good. Smooth start and speed adjustment are present, work normally. Instruction from another model.

Goods in St. Petersburg came in four days. Quality is not bad. Pleasantly pleased with the presence of a smooth start. I'm happy with everyone.

Excellent milling cutter, with a smooth start, the base is compatible with my hammer, took to a rise in cost.

Order received. As stated in the case did not try how I will check unwritten.

Very cool Fraser, full metal, heavy. Recommend. Thank you seller.

Thank you. Got safe. The device works normally. Seller recommend.

Shipping in N/D 4 days. Quality standards for the price

Everything is fine. RPM adjustable, soft start work.

Within two weeks, well packaged. without damage.

Screws that screw in plastic will not last long!

Super fast delivered. I am very happy with it.

thank you very much, got everything