Diy Portable 12V Battery Energy Storage Spot Welding Machine Pcb Board Welding Equipment Spot Machine Accessory

It came in two packages, unwrapped. Board version 9.01, thickness 1.5mm, obviously double-sided; wires 12awg (aluminum), for pulse load is not critical, but compared to 10awg (photo in description) Power tracks are thinner than the contact area of one MOSFET, you need to strengthen. MOSFETs 4n04r8, if original, then it is 100a optimal at VGS = 10v each. It wasn't much to attack them anymore. The board is not designed badly, but with a wiring clearly did not bother. Marking MCU is rubbed, but judging by the power it's stc15w20xs series, they found something to hide. In general, the designer is not bad, although it is necessary to complete thoroughly.

Made a separate power from 18650 with a step-up board and a 4056 with Type-C Rank board, also connected the connector so that it can be powered by B/C. But it's superfluous and so charges and works. Put the switch and led the indication and button outside the case. Drilled holes for the Future fan, then I will. Lost and lay the tracks with a thick layer of solder. I haven't finished it yet. FETs, waiting for the transistor. Delivery by our from-Rasha 3 days in one hundred five. On Mode 5, it's fried that you can tear the off. In general, I advise! I am happy!

ASSEMBLED WELDING. 0.1 is very confident. But 0.15 is not very yet. To straight with meat welded-you need 2 times in one place at the maximum level. There are suspicions on the probes that used to attach to the battery. I'll try normal terminals, unsubscribe. And so, from the improvements, the power is separately on 12 V (so as not to burn the keys). Well, a little solder of tracks filled. The electrodes are fine. All this is not bad shown in yutuba, I advise you to familiarize yourself very much.

Externally there are no complaints. Everything is done very clearly and at a high level. The capacitor is not no name, but Sanyo, which of course pleases! Everything was tracked and arrived on time. Packed well. I'll unsubscribe as soon as I try. And this is literally the other day. ;) The seller is undoubtedly thank you! I recommend definitely!!!

Good Goods. In the kit there were even protective plates made of plexiglass and accessories. Everything was done qualitatively, it was not difficult to collect. But one nuance that spoils the general picture-why not crimp all the wires, why leave the consumer the opportunity to learn ??? Immediately I could not start, did not work out the wires.

Excellent Device, varit well, but you need to refine (strengthen the tracks with a single-core copper cable, for logic to output a separate food). The case is transparent, do not forget to shoot matte plates! In the photo, the peak current is 5 mode (400A, but this is a very weak battery for me), on the first mode of current 260A)

Before you strengthen-check how it works! I added a transistor, used 2 x 12awg on each line in quality test wires and reinforced the 3x1.5.5mm wire on one side: Recorded from a separate BP. The power part from the car battery, just the signs pressed. Native screws replaced with hexagon. All terminals are missing

I thought that I ordered only a fee ("v7 Blue Board"), but this is a complete set with wires. If anyone expects to solder on the reverse side of the transistors, it is better to think about it a hundred times. A simple soldering iron does not do this, you need good equipment. I didn't get it.

Excellent thing, so far I just assembled, did not Weld. I did not understand why the slots in the case for the cooler, the distance from the case to the board is exactly 10mm, which is equal to the thickness of the cooler, and the MOS the board has 5 V power supply)

Excellent. I'm going to collect as shown in yutuba, with a separate power supply. Buttons included are two and both workers. The wires are too short, we add, increase the section. In the garage is now cool, we will transfer experiments to the spring.

The Assembly took 10 minutes taking into account the heating of the soldering iron. On AKB 18 Ah welding quality is not in principle. At the starter battery 60 AH welded firmly. Thanks to the seller, everything works

The team arrived as described. A PDF of explanation of use would be barbaric. Good quality, works excellent It would be nice to know the other connecting pins for which they are or how the equipment can be modeled

Shipping from Moscow before one week. It's the cash in Pyaterochka. Collected Works. Description. Really missed a Bolt clamp terminals, but then again the Button put… Okay, it's little things 5 Stars!

It came in 5 days. I did. You can not do without a soldering iron. But it was worth it. I got an AKB for schurik. Satisfied. But the AKB is supposed to be powerful. From the motorcycle did not Weld.

I ordered from Russia. Courier Service Express delivered directly to the apartment in three days. welding works (the best mode for welding the last when the red indicator is on).

I brought the courier home. I haven't checked yet. I'm waiting for the 12 V 7000 MA/h as soon as I try. In appearance, all the norm. with the seller did not communicate + 5 all.

A good set, it came quickly, delivery in Russia, I will try to complement after I use it. Ordered 5 more FETs to finish on the other side, on reviews it should raise power.

The order came in two packages. and this designer had to collect himself. for such a sum could be sent in collected form. pleased with the delivery.

The parcel came on time, the kit is full. Everything corresponds to the description, in the work has not yet checked.

The designer came quite very quickly, in the kit two mikrika. How to collect I will try to complement the review.

Traveled for more than three months. I already thought it wouldnt come anymore. But it arrived. Works perfectly

Fast delivery and hardware works well with level 2 welds flawless 5 Star Cable 10 square. 5 stars see photo

Fast delivery all clearly and neatly thanks, as I will check and will be additional reviews

With my Akum varit 0.15 do not tear off and on the other hand you can add 5 more power

Very fast shipping! 2 days. Packed norms. At work I will check later.

After the assembly is tested, it is probably necessary to finalize.

The seller is responsive on all questions, I'm happy to recommend

Sent quickly all as in the description to the seller respect

Did not check yet