Diy Cctv Camera Ir Waterproof Camera Metal Housing Cover.Cy-C1010C

Delivery 9 days, tracked all the way. Case in foam bag, top foamed polyethylene and foam box. The seller put as a gift foam rings, M2 screws and spare glass. I order this case not the first time to assemble street cameras. Previous buildings have successfully experienced rains and freezing. The only negative is the absence of a visor, during the rain the glass is covered with drops of water. The case is aluminum, screws made of steel. Silicone pads on all threaded connections. You can install a board 38x38mm or 32x32mm through the adapter. The maximum height of the module at a standard installation of 26mm butt to the PCB. If you take the adapter 32x38mm, module 32x32mm and brass racks 7mm, you can install modules up to 33mm high back to back without the PCB thickness. These are modules with f0.95 (4mm and 6mm) lenses. The adapter will allow you to lower the module below the landing holes of the case, while there is room for input of the cable, also butt.

The case is normal like a sealed (tried vacuum)-Glass glass) complete with fasteners and a type of edging from the foam for the camera lens. Delivery three weeks to Moscow to my post office. With the seller did not communicate-there was no need.

Packing is just super. Foam box, inside everything is broken by foam plastic, all in bags, fixed. Rarely is such a thorough approach even in Chinese.

Fast shipment, fast delivery. To St. Petersburg 17 days. Great packaging. Product and seller recommend.

Fast shipping. The product corresponds to the description, the seller is sociable. Recommend

Quality is super, glass on the nut