• Cnc 3018 Pro, Diy Cnc Engraving Machine, Pcb Milling Machine Laser Engraving Grbl Control Engraver Cnc Laser, 30*18Pro


    USD $253.16VAT Included50% OFFFree Shipping
    Just for Dropshipping and Wholesale



    How to pay?
    • Ships in 24 hours via Fast Shipping.
    • Estimated Delivery 5 to 9 Business Days.
    Customer Reviews
    *Note: Some reviews have been processed by Google Translate!
    E***j Verified Buyer

    Why do you see a little different CNC in the photo? And all because-that I came a set with completely killed table bearings (and the carriage bearings are ideal, which is amazing, so that I do not even think about changing them) and I decided to interfere immediately with the design, turning partially into "rails", and if you have a 3D printer, then it's not difficult to do it. While the process is not yet complete, but how it is already working-I like it. Then I'll add a review when I finish the modification-it remains to fix from below the crossbar, for which I will move the updated Y axis (the last photo, will be be be Evaluation did not decrease, because. All the rest without any defects, including absolutely straight shafts and running screws, only these four bearings, and the price of the kit is low to require 100% of the quality of it to all. By the way, the motor with the cartridge almost does not beat and it turns out to be even a little better to count.

    5
    G***u Verified Buyer

    Excellent machine, complete complete set of very decent quality, from the seller the link to the documentation is complete. While only used an autonomous operation controller, you can adjust the pitch of the milling cutter from 0,1 to 10mm, there is a cable for connecting to the computer and the installation disc. Everything is clear and clear-this is the first Step. Now I'll try it online. I'll write it up. We need to figure it out. Now the engine has been running for an hour at idle heating of the shd do not observe, before this 20 minutes on load (chipboard), also do not warm. In a set of 10 cutters, the spindle is already installed. On the Motherboard there are connectors for connecting Laser, I.E. You remove the spindle unit and install the laser unit.

    4
    F***v Verified Buyer

    Everything is very well packed, simple and clear when assembled. There is a confusion with the axes, the engines were connected to the control board at random, the direction of movement along the x axis when manually controlled in the end turned to the reverse,, but Some bearings of the slide turned out to be with a small backlash, but when assembled everything turned out hard, without backlash, the axis of sliding is perfectly smooth, the plastic parts parts parts The head of course will spring when pressing due to the bending of the axes of sliding, but the impressions are as positive as possible, let's see the machine in operation!

    5
    M***o Verified Buyer

    Machine working. Going easy. All the bolts in the kit were put with a margin. The details came in a metal chip, it is necessary to carefully clean before assembling. On the axes a little sticks in the extreme positions, the X axis has already developed, the y axis is still jamming. Milling cutters in a set of low quality-it looks like a former in use. The board has a connector for Z probe.

    5
    E***f Verified Buyer

    Came very quickly-in 5 days. Without damage, full set. Software and detailed assembly instructions allow you to start the unit in a short time. Confuses the absence in the proposed set of limit switches. Of course, it will work without them, but their connection would exclude emergency situations. But if you need them, you can buy them separately. To the seller-thank you.

    4
    E***j Verified Buyer

    The seller sent everything during, but did not release at customs for a long time. The seller is good! Worried and sent from Russia after raising prices! The courier brought straight home. I recommend the seller and the machine! Collected in 40 minutes! Ten stars to the seller!

    4
    R***f Verified Buyer

    Nice designer style Lego. the plastic parts are well-made. There is no backlash. Going well. Included T Mills of the same. For starters Driver became 8.1 wines. Happy. The thought of table 300 х360мм Satisfied with the purchase

    5
    Z***e Verified Buyer

    Delivery is fast, until I collected, but at first glance all the details without defects, everything is packed very neatly and well. The seller is responsive, sent links to video Assembly and software. I recommend this seller.

    4
    Y***x Verified Buyer

    Good stanochek! Sorry only board old version. Was not included in the radiator for drivers stepper motors, and during heated they much, had to look for something at home. But in general, purchase I satisfied!

    5
    E***q Verified Buyer

    Everything seems to work. Shipping from Russia very fast in Tver area less than two weeks. Bought for his father's hobby he has not understood by all nuances but collected and machine work. Recommend!

    5
    P***w Verified Buyer

    The machine came in 8 days, completely working luftov no all functions performs perfectly. there is a lack of software and the control board does not work Laser, I had to solder the jumper the

    5
    U***p Verified Buyer

    Delivery is fast, DPD at altitude. The machines in the number and assortment correspond to the order. The complete set of machines CD discs is atavism. The seller is verified, I recommend.

    4
    K***h Verified Buyer

    From Moscow to Krasnoyarsk for 17 days. Worthy packaging, full set, simple assembly. After installation, everything buzzed and twisted. Radiators for drivers are not included.

    5
    A***s Verified Buyer

    A good machine, there are no Lufts at all, I thought they did not put radiators for the drivers of the BD, but there are just new drivers, they do not need.

    5
    W***t Verified Buyer

    Delivered in 3 days to the Kaluga region, in a box Pyaterochka. Packing Super, electronics and motors work, I will collect mechanics later. Thank you!!!

    5
    B***s Verified Buyer

    Everything came very quickly and in full configuration. I collected in 30 minutes, I still did not have time to connect and configure.

    5
    H***i Verified Buyer

    Came in 6 days to the Pskov region. Easily assembled, everything came up, on the disk all the necessary software. Checked-works.

    5
    V***k Verified Buyer

    No backlash, details of molded plastic (no 3D print) Driver replaceable. What else can be said? 3018 as it is)

    5
    W***i Verified Buyer

    5 days to Kursk. I came in five. I'll collect, check, I'll add a review. Thanks to the seller, I recommend.

    5
    U***r Verified Buyer

    Everything came quickly. Packing is reliable. Instruction in the kit. Assembly clear.

    5
    V***g Verified Buyer

    In store for the pair bolts, Gadget gone all. Upgrade to 1.1. Thank you very much.

    5
    E***c Verified Buyer

    Works, though just check the laser. There were problems with complete cord-USB.

    5
    L***t Verified Buyer

    Everything is good, all the works, heatsink only not put, but it's nothing,

    5
    I***u Verified Buyer

    Stanochek is good, but drive frail and fine, there is no backlash

    5
    W***m Verified Buyer

    First CNC machine! Was very pleased, however collected almost day

    5
    H***x Verified Buyer

    Delivered quickly, everything works, I'll add a review later

    4
    P***l Verified Buyer

    Parcel Arrived, corner wrinkled, but within all OK!

    5
    E***a Verified Buyer

    Delivery fast. Seller always in touch. Issues.

    4
    E***e Verified Buyer

    Thank you. Got fast. I haven't collected yet.

    5
    V***u Verified Buyer

    Fast shipping full set

    5

    Model Number: CNC Pro router engraving machine 3018
    CNC or Not: CNC
    Is Smart Device: No
    Condition: New
    Certification: CE
    Working area: 300*180*40mm
    Software: GRBL control 0.9
    milling cutter diameter: 3.175mm
    spindle: 775
    Type: DIY CNC milling
    Frame size: 400*330*240mm



    30*18 PRO CNC machine

    Control software

    GRBL control 0.9

    Construction

    Aluminum + plastic

    Working area

    300*180*40mm

    Frame size

    420mm*355mm*280mm

    Spindle

    775 spindle motor (12-36V) 24V: 7000r/min, 36V: 9000r/min

    Step motor

    1.3A 0.25N.m

    Power supply

    24V 5.6A

    Supported system

    Windows XP/ Win 7/ Win 8/ Win10 Home

    Laser (options)

    1000mw 12V 405nm

    2500mw/5500mw 12V 450nm

    Drill bits

    Diameter: 3.175mm tip: 0.1mm length: 30mm

    IMPORTANT NOTICE

    • 1. Spindle with cutters mainly used for engraving: Wood,Plastic,PCB,Acrylic,Pvc, Plywood,etc.

    • 2.Laser engraving for: Wood,Plastic,Leather,Bone,Stone,Paper,Shell,etc.(Can't engravemetal)

    • 3.Offline controller supports offline work, you will not need to connect to a computer

    • 4.If need offline function please choose CNC with offline in size options.

    • 5.If you need more accessories, please contact us.Allaccessories available.

    • 6. ER11 is preassembled on spindle shaft before shipping.

    Package include

    • Sets options

    • SETS 1: 30*18PRO+10*Cutters+ER11+4*plates

    • SETS 2 : 30*18PRO+10*Cutters+ER11+4*plates+1W laser+goggles

    • SETS 3 : 30*18PRO+10*Cutters+ER11+4*plates+2.5W laser+goggles

    • SETS 4 : 30*18PRO+10*Cutters+ER11+4*plates+5.5W laser+goggles

    • Size options

    • CNC without offline: no offline controller

    • CNC with offline: offline controller is included in package

    About software

    A CD with software and assembling instructions is included in the parcel, or you can contact us to get a link for downloading in advance.

    About Shipping

    Ship from China:

    DHL/FEDEX: 5-8 days

    EMS: 10-20 days

    Ship from Russia:

    IML express: 3-20 days (Ship from Moscow)

    WARRANTY SERVICE

    One-year warranty and we will always be responsible to solve all kinds ofafter-sales issues.

    All parts will be checked before shipping and will be packed well.

    30*18 Pro(with ER11)

    Appearances of New Control board:

    1000MW laser has 2 pinwire, connect to port laser A

    2500MW/5500MW laser has 3 pin wire,connect to port laser B.

    Appearances of Offline Controller:

    Appearances of New lasers:

    —————————————————————————————————————————————————————————

    ___________________________________________________________________________________________________________________

    Buyer must read:

    Before buying

    We ship to worldwide, but if your country's customs is strict or if you have any question about the declared value, please contact with us before buying.

    For Germany customers, please provide EORI number when you place the order, if don't provide EORI numberwe can not ship via DHL to Germany.EORI number=Economic Operator Registration And Identification number.

    For Argentina customers, please provide tax ID when you place the order.

    Payment

    We accept many kinds of payment methods, VISA, QIWI WALLET, Bank Transfer etc. If you are not clear about it, just click "buy" and follow the steps. It is very easy for new buyers.

    Please noteimport duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility.

    Shipping

    Usually we will ship in 48 hours after payment and update track number.

    There is a website which can track most of the shipping methods include DHL/FEDEX/EMS/J-netand post mail:https://www.17track.net/en

    For DHL/FEDEX, sometimes when the parcel arrives, DHL/FEDEX will contact with you to help finish customs clearance procedures. Please make sure the phone number in order information is real.

    A request as seller, please write your email address in order information so that we are able to contact you if there is some urgent issues. We may call you if it is did urgent, but we can only speak English. For the customers who doesn't speak English, email is the best way.

    After-sale service & Feedback

    Please open the package and check it before confirm receipt. If some parts are damaged during transportation, please contact us to get replacement parts. Or if you have any problem of assembling and wroking,please give us the opportunity to solve problems.

    And if you are satisfied with our products and service, please don't forget to give us all 5 stars feedback.