Cmcp 54Pcs Cutting Disc 32Mm With Grinding Wheels For Dremel Accesories Metal Cutting Rotary Tool Saw Blade

To Krasnoyarsk 36 days, the first time used the selection saver service, past discs from another seller went 75 days and also from Hong Kong, though there is no net housekeeper and the price is not 300 If the price is above 300 rubles, there will be at least partial tracking. This track from the seller zh, which guarantees partial tracking (the receipt to the territory of the country (impo) and at the place of receipt of the parcel). The last discs were 38mm, which I used at the cottage, lifting the toilet from scratch, cut them off the edge of 40-50 samorezov, then I got one. Of course, the Bulgarian is easier, but with the tree sometimes easier to work, cleaned the door handles, hinges, etc. Red discs are still fuflo, but it's better to take all the same at 38mm, visually they are larger in size, laziness to pull out the tree for comparison, but, although I and these for 5 years will be enough. On aluminum they instantly work, cut them three.

Discs are normal. The pin from the rivet was poured, in general, the saw is worse than the homemade cut from a thin disc from the Bulgarian, almost twice as slow. At the same time, small metal dust is formed, and you need to use a protective mask so that the lungs do not fly. In general, the discs are not bad. But there are many, enough for a long time!

In appearance, the discs are good, but did not check in the work. It came exactly 50 pieces and 4 shafts, as ordered. I ordered 27.01.2022, got to the Vologda region 24.02.2022. The size of the disc, as stated, is about 32mm. Thickness approximately 1.2mm. Shaft diameter ~ 3.0-3.1mm. Discs are reinforced.

Packed well. The stud in the state of Tsang Dremel 4000 gets up well. Slightly smaller in diameter with the original. On the resource 3 to 1 original. Saw Bolt M10, 2/3. It took 5mm of the disc, see for yourself, take or not... For this money is very worthy, 5 stars.

Thank you to the seller, the order came to the Mail, I did not notice any problems with the problem, everything is fine, everything corresponds to the description. Quality looks good in work I will try later. I recommend the seller and the price is good than others.

Corresponds to the description cut well send quickly but comes medleno Save with keshbek on purchases payment up to 40% of the purchased order on the Adafar and the other stores go to the HTTP link: // meinvon.com

The product corresponds to the description, the quality is excellent, the diameter of the disc is 32mm., the quantity is 10 PCs. And mandrel, the goods came quickly, I recommend the seller.

Order on April 15 for a receipt on April 26. Fast shipping. I have not done the test of the disks yet even if they seem rather fragile. To see. But I recommend

Very comfortable or ergonomic cutting discs for work. A good product for the price you have. They got here pretty fast. When I need more, I'll buy again.

With the shutters, the discs scroll, the equipment will not last for a long time, without them like norms, saw well, but it would be better to be thinner

It's been a long time, but it's coming. The product is according to the description, although the quality could be better

50 discs + 4 hardware. All right. Still unproven but it seems to comply with the described. Price ratio, correct quality

The product is exactly as described, the quality is excellent cuts very well , incredibly fast delivery, thank you! :)

Order arrived in 9 days in Belgium. The article looks good. It remains to be seen if the use will be up to date.

Excellent! The head cuts the self-nuts for once! Some hit the shaft a little-not critical. To buy I recommend!

All right, thanks to the delivery company one day we weren't home and then came back to make the delivery

Received thank you seller packed perfectly I have not yet checked the appearance qualitatively

In the set of discs 25 PCs, one holder with rubber seals. Buying norms Seller recommend.

I arrive everything described and without damage, I would need to try to see its quality

Erecido today my purchase in very good condition the warm is very good to

With Shurik is not convenient, the diameter is small, Shurik is wider

Delivery to Kazan 20 days. took for plastic metal, too, is accurate.

They cut well even though some come with the bare protective mesh.

Super fast shipping. In 8 days in Barcelona. We have to try them.

I order a second time, as always fast delivery and good quality!

Come quickly. I haven't tried it yet. They came to Sberbank.

It came in 15 days. Everything is great, the seller respect!

I did not check the quality yet. I'll check out the extra.

Like Mt product reached about 4 days before the deadline.

All as ordered. Long sends.