Bga Led Lamp Bead Station Fever Plate Station Lcd Strip Chip Thermostat Heating Plate

The goods came to Pereslavl-Zalessky in about 4 weeks. Everything got intact and serviceable. Everything works in accordance with the description. See the pictures. After turning on the cold heater into a 220 V socket, it consumes 3.9a, which corresponds to the power of 858 W. As the heating (about 1 minute), the current is reduced and stabilized at 0.85-0.9a, which corresponds to the power ~ 200 W. At the same time, the temperature on the surface of the heater stabilizes at 240-250 degrees Celsius. Everything works as it should! From small remarks-the legs to the heater are fastened with screws with semicircle heads, which act above the plane of the heater. Therefore, you will not put a large fee on the heater tightly. But it's easy to fix. I plan to unscrew the holes and replace the screws with half-round heads on the secret ones. Product and seller recommend.

The goods are good, it is heated quickly. At start almost 1 kWh but drops to 0,4. In work did not try, the temperature did not measure. But on the feelings of fire))) you need to think of how to isolate the surface and you can work. The goods came to Uzbekistan for a month. Tracked. In the kit came a mat, tweezers and insulating tape. For what the insulating tape, XS, but nice)) The surface was a little lost, but it's because of the legs that went in the kit. The goods are still satisfied. Of the shortcomings: heating occurs from the center of the surface, but with full heating, the difference is invisible

Excellent preheating table, which you can solder not only led strips, as well as whole assemblies from lamps on an aluminum substrate of 100 watts. Look at the photo: two bars were stocked in five minutes, and the preparation took a lot more time than on soldering. The main thing is that there is no overheating of LEDs, which means that less likely of their degradation. The package came in a composite parcel for a month, the track number was partially tracked. To the seller five stars left for quality goods and fast shipment. I recommend to buy in this store.

The delivery is good, the parcel came quickly in 14 days, was tracked normally and received conveniently at the 5post issue point. Packing good all came whole without damage. The description of the goods is fully consistent, the package as indicated on the site. Installed the legs and connected the cord, tried to heat perfectly. I recommend the product good.

Everything would be good, except that the seller does not protect the goods from inappropriate quality of delivery-not a single navel... The tile itself remained alive and unharmed))) However, the terminal is the end... I personally do not need it to connect, but someone could not lead... It is not enough that the goods paid are defective (((

I am very pleased with the order! Good seller. Thank you. The seller sent the goods in 2 days after payment. The parcel in Kemerovo reached 48 days. (Adafar standard shipping). Temperature is more than necessary.

The goods came without one leg. I demanded half the money back. The service responded quickly in my favor. Thank you all. On the first photo himself completed for phone boards

The order is received on time, the device for warming up and replacing the diodes is satisfied, the product of good quality, thanks for the variety of nichtyaki in the kit,,

The packaging was damaged during transportation, probably bent, probably for this reason it is bad on the table (Shatat). Heated quickly, the goods are satisfied

Corresponds to the description. Works. Order to Kazakhstan for almost two months. Packed well. Got it without damage. I recommend the goods and the seller.

It's like the description. Only do not use terminals from the kit, very much heated, you look molten. Connected through yours, everything is fine.

Good morning. By dismantling the detail of the 3 pay block live, sealing up the money on the currency fee. Push-up is automatic. That's good!

Excellent! Everything works well. Whatever the table was, I made it with food foil. It is very convenient not to wash it every time!

The seller sent for a long time, almost a week. It came in less than a month. Heats stable, 240 degree C. Heats up quickly.

The parcel went 15 days, decorated the delivery with a new mail. Everything is intact. I'm happy with the purchase!

Delivery to Arkhangelsk is exactly a month. Everything works, the diodes are draining. Thank you seller.

Very cool, they also put a mat, tweezers and an isolente. Many thanks, I will order more

Well, very quickly arrived, the temperature is about 270 degrees, all as described.

T like the packaging very good. Excellent Product recommended arrived in 30 days

Quick delivery through Pyaterochka all works recommend the goods and the seller

Well packed, arrived intact and undamaged. Excellent seller, I recommend it.

The product fully corresponds to the description. Fast shipping. Recommend.

Shipping is super fast. Everything is like in the description! Recommend!

Got fast. Happy with the purchase. Works or not I will check in practice.

Pachet, how the hell! At half the power, everything Rose in seconds!

Thick boards warm up not enough, need to use soldering hair dryer

For now it is being done well, meets the described, recommended

In the kit there is another small mat selekon, tweezers