Aluminum Alloy Case For Raspberry Pi 4 Black Box Metal Shell Passive Cooling Enlosure Case For Raspberry Pi 4 Model B

Impressive case. Temperature dropped 20°C at the same use I was doing with the official case (no fan or heatsinks, just the default board and white/red original case). I set up the Pi4 with Retropie for my daughter, and after she played emulators a while the temperature was rising up to 70°C or above. Now it stays at 50°C or a little below that (room temps around 30°C). I found it better to stick the adhesive tape side to the case towers, to avoid leaving old glue residue on the chips if I need to change the thermal pads someday. It's also very well shaped and closes really good with the allen screws in the kit.

Only 10 days to AU! Very well packed and exactly as described. I had some trouble peeling the backing later off the included thermal pads. Turns out that while the clear layer peels off fine, the white layer needs to be heated before it will peel off. I used a heat gun set to 160 degrees C and after heating them up the white side peeled right off. But you can see from the photos the first pad I tried without applying heat is a bit of a mess!

The case cools all the necessary chips, unlike others. Does not buzzing, as it is not strange) the quality of casting has more than arranged me. Slightly difficult access to the microSD map. About the WiFi, I do not have a pritensiy, 5 GHz catches, the speed of norms in this case, but of course something is shielded, it is necessary to measure to to measure while lazy and so everything is fine.

2 weeks to Mo in the collection order. Beautiful Body! Here they already wrote about the defect of casting on the column of the processor. Before the assembly, he finished working with a file) because he was not sure that the paint is good for heat. When watching the video, it heated more than 60, but it stood on a heated projector. So norms!

The thermal pad like coming nicer. Case role also seem well. With or without a used when writing the bottling was took continue the data, after use less Gurley seem to four. As Ion screw month middle year should not be fixed Safety Month only by fixing messes. This will take away and make you satisfied.

Excellent passively cooled case. Pi's temperature at idle is around 41C, goes up to 60C after a 15 minutes stress test. Fast 64Gb microSD card: 43.4 Mb/s sequential read, 18.3 Mb/s sequential write, 9.2 Mb/s 4k random read, 2.3 Mb/s 4k random write in the Pi. Power supply also seems high quality.

Two sets of gaskets of course not, but otherwise good quality. There are slots for output of GPIO and camera cables. The case is massive enough therefore heat-intensive. Assembled normally, did not sign anything, everywhere normally treated surfaces

Body fire. Finished the contact areas as in the reviews, delivery instant almost, ordered 28.10 came 5.11, yanao. The temperature from 67 fell to 46, at the slightest blow still up to 37. (on the chart the temperature is purple)

ordered 9th August received 17th August everything appears to be there, looks like they have potentially sent genuine SanDisk card either way does are decent enough, everything is quality made very impressed

Fits very well, weighs, looks solid and quality. It is advisable to sand a small salient in one of the salients that touch a microprocessor as indicated by more comments.

Up to Yekaterinburg in 12 days. the quality of the case is excellent, low under thermal pads a little with garbage from the mold, but not critical, a USB 2.0 card reader.

Delivery zipper! In the Volga Volgograd region. The case itself is also perfect, cleaned the areas from the paint for better heat transfer with microskins.

Very qualitatively made, all to the smallest detail for sure. Temperature from 70 degrees at fixed radiators fell to 45, I recommend!

very nice case. it fits my raspberry perfect. The temperature is in good range. I am happy with the item

Excellent case for the raspberry pi 4. It is solidly built and finished well. Recommended.

It came to Moscow very quickly, the body is quality! Cooling is good.

It fits great and temperatures are down for about 10°C

Very quickly get delivered and works flawlessly

Perfect case for RP 4!

Fits very well to Pi 4

Perfect condition

Looks good!

super

great