• 1S/2S/3S/4S/5S Li-Ion 18650 Lithium Battery Charger Lipo Cell Module Pcb Bms Protection Board For Drill Motor With Balance


    USD $2.45VAT Included50% OFFFree Shipping
    Just for Dropshipping and Wholesale



    How to pay?
    • Ships in 24 hours via Fast Shipping.
    • Estimated Delivery 5 to 9 Business Days.
    Customer Reviews
    *Note: Some reviews have been processed by Google Translate!
    K***e Verified Buyer

    The scarf came as part of other orders. Each board was packed in an individual sealed bag. Used to redo the screwdriver. I soldered the batteries, washed the flux and checked. The load holds, goes to protection when blocking the cartridge and at the KZ, it goes out itself in a few seconds. I did not communicate with the seller, but I can recommend it. The rest of the scarves from other sellers had jambs, they either went to protection in the load, or did not leave it.

    4
    Q***l Verified Buyer

    The order is received, packed in pupyrku. Apparently all great forward akkamulyator for checking. Order Time: 2022-04-26 21:23 Received the order: 2022-05-26 19:02 Review the check BATTERY. Thank you! :-)

    4
    H***v Verified Buyer

    Work and this is important! Pleased with the service. Order 19 May 2022, come 6 Jun, but wrote that will not previously 29 Jun. It was packed very well. In general, well done.

    4
    R***k Verified Buyer

    The quality is excellent, with the wrong connection, erroneously KZ, the protection worked. The board is in good condition, took for remaking Shurik. Delivery exactly month

    5
    H***c Verified Buyer

    The order was made in the Moscow region on 09.03.2022, and received on 03.04.2022. everything corresponds to the description on the site. thanks to the seller.

    5
    E***t Verified Buyer

    The parcel received, 30.06 ordered 20.07 received. externally everything is in order, not yet included I will check the feedback. I recommend the seller.

    4
    X***z Verified Buyer

    Fits the description of goods, have not tested. Packed modest, but enough. Quality workmanship is good, all carefully soldered, flux washed out.

    4
    A***t Verified Buyer

    The order came in full accordance. Packed in individual bags and tape. There is no damage when forwarding. Product and seller recommend.

    5
    Q***l Verified Buyer

    Balances, charges. As under load I do not know yet, but if something goes wrong, I'll add a review. As long as satisfied

    5
    G***f Verified Buyer

    Product came as ad but took to deliver maybe because the ports that were closed in China. Now only testing! Recommend.

    5
    Q***d Verified Buyer

    It came quickly, everything works, the 12 V Assembly turns off at a voltage of 8,2 V, thanks to the seller.

    5
    I***v Verified Buyer

    Delivery very fast for 2 weeks in Chelyabinsk region Postamat delivered. Quality on top. Seller recommend.

    5
    D***x Verified Buyer

    Never came! But the seller himself told me to open a dispute! The money was returned, I had to re-order

    4
    W***s Verified Buyer

    Everything is OK, fast and high quality! The third time I get from this seller, I recommend!

    5
    X***x Verified Buyer

    The order is received, packed in pupyrku. Everything is fine in appearance

    5
    J***v Verified Buyer

    Corresponds to the description. Working capacity did not check.

    4
    E***b Verified Buyer

    It's OK. Shawls work fine. The second time I order here.

    5
    L***q Verified Buyer

    Very excellent product and conform to description

    4
    C***i Verified Buyer

    Everything is super, it works as stated.

    4
    S***r Verified Buyer

    The order came within the appointed time

    5
    Q***e Verified Buyer

    All as in the description. Thanks seller

    5
    E***w Verified Buyer

    Second time ordered, everything works

    5
    E***f Verified Buyer

    Order a fourth time. Recommend.

    5
    J***z Verified Buyer

    Seems correct, to missing test

    5
    F***s Verified Buyer

    Everything is fine-thank you

    5
    H***y Verified Buyer

    OK, all in time and form.

    5
    X***h Verified Buyer

    Thanks received!

    5
    P***d Verified Buyer

    Thank you

    5
    G***a Verified Buyer

    All fine

    5
    Z***f Verified Buyer

    Norms

    5

    Model Number: 3S 40A Li-ion Lithium Battery Charger PCB BMS Protection Board
    Continuous charge current (upper limit): 20A
    Continuous discharge current: 40A
    Charging voltage: 12.6V - 13.6V


    Description:

    • 3S 12.6V 40A lithium battery protection board (comes with recovery function-AUTO Recovery)

    • Scope: Nominal voltage of 3.7V lithium battery (including 18650,26650, polymer lithium battery)

    • Product Size: 41 * 55 * 3.4mm (Enhanced Version), 41 * 60 * 3.4mm (Balanced version)

    • Product weight: 8.8g (enhanced version), 9.8g (balanced version)

    • Charging voltage: 12.6V - 13.6V

    • Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current )

    • Continuous charge current (upper limit): 20A

    Enhanced version:Suitable for electric drill with starting current below 80A and power below 130W .(without balanced function)

    Balancedversion: Suitable for electric drill with starting current below 80A and power below 170W .(with balanced charging function)

    Note 1: To successful starting the drill requires three 15C-20C power batteries, or six 10C-15C power batteries (ordinary 18650 battery can not start the drill!!).

    Note 2: When you wiring 0V, 4.2V, 8.4V, 12.6V, please do it strictly according to the wiring diagram.Do not deliberately make it short circuit.

    Note 3: When the battery is charging,the "430" resistance heating is normal,it means the balance circuit is working.If the "430" resistance is also heating without charging,please check if the wrong wire is connected.

    Note 4: Do not use a mix of good battery and poor battery,please make sure each battery is the same in capacity and internal resistance.
    For some of the poor basis of electronic customers to explain: balanced charge is only auxiliary functions, try not to put a good battery and poor battery mixed together! 3 sets of battery capacity / resistance closer to the better! (2 good battery +1 Poor battery use effect = 3 poor battery use effect).

    2S7.4V 10Alithium battery protection board with balance:
    Overcharge voltage range: 4.25-4.35v ± 0.05v
    Overpressure voltage range: 2.5-3.0v ± 0.05v
    Upper working current: 8A
    Upper limit instantaneous current: 10A
    Quiescentcurrent: less than 10uA
    Effective life: more than 50,000 hours
    Internal resistance: less than 300mΩ
    Charging voltage: 8.4V-9V
    Balance current is 58mA
    Storage conditions: -40-- +80 ℃
    Operating temperature: -40 --- +50 ℃
    Size: 40 * 17 * 3.5mm
    Description of welding points:
    · B + connected to the battery positive;
    · B-connected battery negative;
    · MB Connect the battery 1 to the connection point before the battery 2;
    · P + connected to the charge / discharge side of the positive (charge side / discharge side shared);
    • P-connect / discharge terminal negative (shared with charge / discharge).
    Note:Do not deliberately short circuit !
    2S 7.4V 8.4V 20Alithium battery protection board with balance:
    Applicable scope: Suitable for lithium batteries with nominal voltage of 3.7V and full voltage of 4.2V (including 18650, 26650, polymer lithium batteries, without limitation on the dimensions)
    Product Size: 45*15*3.4mm (Standard), 48*20*3.4mm (Balanced)
    Product Weight: 2.9g (Standard Edition), 3.7g (Balanced Edition)
    Charging voltage: 8.4V - 9.0V
    Continuous discharge current (upper limit): 20A (If the cooling environment is not good, reduce the load current use)
    Continuous charge current (upper limit): 10A
    Standard Edition: Suitable for starting drills with currents up to 25A below 50W, or resistive loads below 168W.
    Balanced version: Suitable for starting currents below 25A and below 50W power drills, or resistive loads below 168W, with balanced charging function.
    Note 1: The successful start of the drill requires two 10C-20C power batteries, or four 5C-10C power batteries (ordinary 18650 can not start the drill! ! !).
    Note 2: Connect 0V, 4.2V, 8.4V according to the diagram strictly. When connecting the battery for the first time, it needs to be charged before output.
    Note 3: When the battery is charged, “430” resistance heating is a normal phenomenon, indicating that the equalizing circuit is working; if the “430” resistance is also heating in the state of not charging, please check whether the wrong line is connected.
    For some customers with poor electronic foundation, please explain: Do not mix good batteries and bad batteries together! The capacity/internal resistance of 2 batteries should be as close as possible! (1 good battery + 1 bad battery = 2 battery use effect).
    4S 16.8V 40A lithium battery protection board with balance:
    Scope: Nominal voltage of 3.6V, 3.7V lithium battery (including 18650,26650, polymer lithium battery)
    Charging voltage: 16.8V - 18.1V
    Continuous discharge current (upper limit): 40A (if the cooling environment is not good, please reduce the load current use)
    Continuous charge current (upper limit): 20A
    Standardversion: suitable for starting current below 60A, power 100W below the drill.(Not balanced function)
    Enhanced version: for starting current below 80A, power 135W below the drill.(Not balanced function)

    Balancedversion: suitable for starting current below 80A, power 220W below the drill.(with balance)

    Note 1: The successful start of the drill requires three 15C-20C power battery, or six 10C-15C power battery (ordinary 18650 can not start the drill!!).

    Note 2: strictly according to map wiring 0V, 4.2V, 8.4V, 12.6V, 16.8V, do not deliberately short circuit.
    Note 3: When the load of the brush motor is used, try to connect a non-polar capacitor (withstand voltage above 25V, capacity 10uF-100uF) to the motor's positive and negative terminals to prevent the reverse spike from the motor. Break the MOS tube.
    Note 4: 4 groups of batteries in series, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. The The Discharge test, the voltage drop faster battery that group is poor battery.
    Note:these items areBalanced version.If you need other Version,please contact us.

    3S 25A12.6V 4S 16.8V 5S 21V 18650 Li-ion Lithium Battery Protection Circuit Charging Board:

    5S 10A Li-ion Lithium Battery BMS 18650 Charger Protection Board 18V 21V Cell Protection Circuit:





    5S 15A Li-ion Lithium Battery 18650 Charger Protection Board 18.5V 21V Cell Short Circuit Protection with DuPont lines: