1Pc 220V Ptc Thermostat Heating Plate Soldering Station For Tv Led Backlight Aluminum 68*70Mm

Dimensions see In the photo. I needed them accurate to make the case. Good thing I didn't do until I got... The case will be made of the former motherboard. This multi-layer fiberglass is less thermal than fiberglass is the same thickness with fully remote metallization (oddly enough it sounds). According to the parameters, the board fully corresponds to the declared. In one and a half minutes it will warm up to 260 degrees. Manufactured an additional flashing backlight on a multicolor LED when the device is on. And I put it in the case of the switch. This is a very necessary thing, because it will not let you forget about heating. Consists of 0.25W 470K resistor, 1n4007 diode, 0.1 MF ceramic capacitor and 2,6v led. The case of the switch drilled, led the lens. Everything easily climbed into the body. True calculations were done all day. This is a manufacturer on a note, let him finish the tooling!

Thanks to the seller for fast processing sending the order. The order was delivered to Mordovia in two weeks, the plate came in a package of polyethylene, with a navel inside. Description of the heating plate is accurate, heats up very quickly. There was no need to communicate with the seller. I definitely recommend the seller. Good luck with the business. The delivery service also received a huge thank you order in the dentist of the store Pyaterochka.

Great heater! It is heated quickly enough, the LED was drained in a few seconds, I liked how now it can just be done. My measurements T showed a maximum of 214 degrees, mostly in area 205-210, don't know how much to trust it, but solder melts perfectly, no problem. It came in a month, the track was tracked, though in the national package. Thank you! Recommend.

As soon as I received immediately in the garage on my knees I screwed the cable disassembled two lamps. It works, for a long time I wanted to repair the lamps myself, dreams come true. Lozhish at once two matrices, one for parsing the other for recovery, a fraction of seconds, the tweezers from place to place moved chilled and ready.

At the complex of women. Push-Up mixed with the length of the green Z 4A (2 seconds) to 0.3a (after 10 seconds). For a couple of hvilin, the heat of the fee, the shcho torkalas a leaf of two capacitors. Delivery menche trioch tignev. Come to hell.

It is ok for replacing led mounted on aluminum PCB. I'm satisfied. Please take care of insulation of AC main and safety. I connected the metal case to ground. With 21°C it reaches 220° I mounted it with 4 iron screws M3x50 mm

Asked the seller as a gift tweezers. The seller sent a tweezer with the goods .. In appearance, the quality is good. We have to come up with legs. I recommend the seller definitely.

Good thing, LEDs with ruler stroke flies. Earlier a hairdryer warming, now this plate tried this earth and sky, also a tweezers bonus is not bad. Shipping ochet fast, I'm satisfied.

Shipping was delayed for a couple of days, even though it was supposedly from Russia, complete plate and cable, appearance looked like b/Y into the work, legs made of what it was.

The order came quickly and well packed, in the kit there are no legs, I had to make bolts and nuts, everything works well, thank you to the seller.

It came in 12 days. Packed well. Generally satisfied. I will collect, I will try to complement the review

Heats up quickly, in about 30-40 seconds. Temperature 230 because of the probe bad contact, in fact more

Seller recommend! Delivery lightning! The product corresponds to the description! Thanks for the gift!!!

The order arrived at the sight of all the whole has not yet checked in the work I will check the seller

Goods come quickly, it works fine, diodes otpaivat well. Thanks for the fast delivery and good package.

I received the goods, it corresponds to the description, I will check the work later. Thank you.

It's a little gift for my esposito. He works in electronics and I know it'll be very helpful.

It looks exelent quality and tmbn looks good in shape came fast and in its good packaging

Delivery from Russia is less than a week, it is heated quickly, the result is satisfied.

Delivered quickly 5post in 7 days, the wire is not attached, it and better put its own.

You'll have to melt yourself. They reported the tweezers. I haven't tried it yet.

Ok. but for some reason I thought that the magnetic legs were included. I don't.

Everything as described. Well packed. Not tested yet but everything seems right.

Super quickly delivered, to Moscow. The seller attached a gift-tweezers.

Everything works, only you need a thermoregulator before you order.

Delivery 2 weeks, works perfectly, need a stand, seller respect!)

Gather it yourself. But everything works. three days delivery.

Quality is good. Fast shipping. I recommend a producer.

Heats up quickly. Temperature keeps within 230-240 c °

It came quickly, packed well.